Search Results

Collection

Emission Control Modeling, 2016

2016-04-05

The papers in this collection cover exhaust aftertreatment system models, as well as their validation and application. Technologies encompassed include DOC, HC Trap, DPF, GPF, LNT, TWC, SCR, SCRF, ammonia oxidation catalysts, hybrid or combined catalysts, urea-water solution spray dynamics, and mixture non-uniformity. Modeling aspects range from fundamental, 3D models of individual components to system level simulation, optimization, variation, degradation, and control.

Collection

Autonomous Systems, 2016

2016-04-05

With a mandate in Europe for Autonomous emergency braking systems, there is a development happening with radar and camera based systems to do collision mitigation. The challenges include robust object tracking, stationary object detection, reactions for false positives etc. The developments and challenges in the collision mitigation technology are included in this collection.

Collection

Advances in Catalyst Substrates, 2016

2016-04-05

Papers included in this collection cover the systems engineering experience required to achieve ultra-low emission levels on gasoline light-duty vehicles. Emission system component topics include the development of advanced three-way catalysts, the development of NOX control strategies for gasoline lean burn engines, the application of high cell density substrates to advanced emission systems, and the integration of these components into full vehicle emission systems.

Collection

In-Cylinder Processes, 2016

2016-04-05

Classical diesel engine combustion with relatively short ignition delay, including papers dealing with low CR and high EGR calibrations. Papers describing experiments and test data, simulation results focused on applications, fuel/additive effects, combustion control, and mode change are part of this collections.

Collection

Electric Motor & Power Electronics, 2016

2016-04-05

Power electronics and electric motors are essential for improving vehicle efficiency through drivetrain electrification. Technologies that support high efficiency, high power density, and low cost motors and power modules are required for the success of vehicle electrification.

Collection

Energy Efficiency of Thermal Systems, 2016

2016-04-05

Proper thermal management can significantly contribute to overall system energy efficiency. The papers in this collection highlight the latest developments in thermal management energy efficiency.

Collection

Particle Emissions from Combustion Sources, 2016

2016-04-05

Papers in this collection focus on particle emissions from combustion engines, including measurement and testing methods, and the effects of changes in fuel composition. Topics of the environmental and health effects of elemental carbon and organic carbon that constitutes solid cored particles plus the environmental and health effects of secondary organic aerosol emissions are also addressed. This includes particulate emissions from both gasoline and diesel engines.

Collection

Powertrain NVH, 2016

2016-04-05

The papers in this collection reflect the recent advances on the research, development and practices of Powertrain NVH treatment. The technical papers are of interest to powertrain system designers, testing specialists, NVH experts, and other individuals who evaluate and develop technologies to control powertrain NVH. The coverage includes: engine, engine subsystem and components noise and vibration; powertrain systems noise measurement and instrumentation; powertrain systems noise analysis.

Collection

Engine Boosting Systems, 2016

2016-04-05

The papers in this collection cover conceptual, modeling and experimental studies relating to advanced turbochargers/superchargers and advanced boosting systems to achieve increased power density, better fuel economy, and reduced emissions.

Collection

HCCI, 2016

2016-04-05

Classical HCCI combustion with temperature controlling combustion onset and only a modest effect of fuel injection. Papers describing experiments and test data, simulation results focused on applications, fuel/additive effects, combustion control, and mode change are invited are included in this collection.

Collection

New CI & SI Engines and Components, 2016

2016-04-05

The papers in this collection covers topics regarding new CI and SI engines and components. This includes analytical, experimental, and computational studies covering hardware development as well as design and analysis techniques.

Collection

Multi-Dimensional Engine Modeling, 2016

2016-04-05

This collection covers advances in the development and application of models and tools involved in multi-dimensional engine modeling: advances in chemical kinetics, combustion and spray modeling, turbulence, heat transfer, mesh generation, and approaches targeting improved computational efficiency. Papers employing multi-dimensional modeling to gain a deeper understanding of processes related to turbulent transport, transient phenomena, and chemically reacting, two-phase flows are included in this collection.

Collection

Control System Design & Calibration, 2016

2016-04-05

Separate sub-sessions cover powertrain control, calibration, and system-level optimization processes related to achieving stringent market fuel economy, emissions, performance, reliability, and quality demands. Topics include the control, calibration, and diagnostics of the engine, powertrain, and subsystems related to energy management in conventional and hybrid operation, considering the simultaneous optimization of hardware design parameters and control software calibration parameters.

Collection

Vehicle Aerodynamics, 2016

2016-04-05

Vehicle aerodynamic development, drag reduction and fuel economy, handling and stability, cooling flows, surface soiling and water management, vehicle internal environment, tyre aerodynamics and modelling, aeroacoustics, structural response to aerodynamic loading, simulating the on-road environment, onset flow turbulence, unsteady aerodynamics, fundamental flow structures, new test methods and facilities, new applications of computational fluid dynamics simulation, competition vehicle aerodynamics.

Collection

CAD/CAM/CAE Technology, 2016

2016-04-05

This collection papers advances the knowledge in product design, manufacturing processes, and engineering analysis using the state-of-the-art computer technology. The scope includes such areas as CFD, manufacturing and assembly simulation, crash-worthiness, computational mechanics, mold flow, ride simulation, ergonomic design, NVH, reverse engineering, etc. Developments in numerical methods applicable to automotive engineering problems are also included.

Collection

RCCI and Dual-Fuel Low Temperature Combustion, 2016

2016-04-05

Mixed mode using more than one fuel not fully mixed before combustion. Most often with auto ignition of spray injected late. Papers describing experiments and test data, simulation results focused on applications, fuel/additive effects, and RCCI (Reactivity-Controlled Compression Ignition) are included in this collection.

Collection

Advanced Analysis, Design, and Optimization for Materials, Restraints, and Structures for Enhanced Automotive Safety and Weight Reduction, 2016

2016-04-05

Papers with an emphasis on, but not limited to, innovative ideas to enhance automotive safety with improved material constitutive modeling, analysis method developments, simulation and pre/post processing tools, optimization techniques, crash code developments, finite element model updating, model validation and verification techniques, dummies and occupants, restraint systems, passive safety as well as lightweight material applications and designs are included in the collection.

Collection

Advanced Battery Technologies, 2016

2016-04-05

The success of HEV's, PHEV's & EV's is highly dependent on their batteries. The papers in this collection focus on advanced battery technologies, including, but not limited to: advanced materials and cell chemistries, battery management systems and controls, modeling, testing, diagnosis and health monitoring, safety, reliability, durability, battery charging, battery economics/cost reduction, and system integration/optimization.

Collection

Fatigue Modeling/Testing & CAE Durability Analysis, 2016

2016-04-05

This collection of papers focus on state-of-the-art fatigue theory and advanced development in fatigue testing, material behavior under cyclic loading, and fatigue analysis methodology & research in the ground vehicle industry. Studies and discussions on innovative and improved fatigue theory/methods in will be discussed along with and engineering applications of CAE durability analysis.

Collection

Thermal Systems Modeling and Simulation, 2016

2016-04-05

The papers in this collleciton focus on state of the art simulation technologies for modeling thermal systems and their application in the development and optimization of vehicle thermal management and fuel economy. The papers range from empirical, 1D modeling methods to three dimensional CFD models as well as coupled methods