Need to Sign Up?
Systems Engineering, 2017
Viewing 1 to 17 of 17
Use of V-Cycle Methodology to Develop Mechatronic Fuel System Functions
Author(s): Hill, D., Op de Beeck, J., Baja, M., Djemili, I. et al.
Abstract As electronics make their way into the fuel system, a shift in problem solving can be seen. Previously high risk items were tackled mainly through proving component durability and decreasing ....
Over the Air Software Update Realization within Generic Modules with Microcontrollers Using External Serial FLASH
Author(s): Bulmus, A., Freiwald, A., and Wunderlich, C.
Abstract Connecting mobile communication channels to vehicles’ networks is currently attracting engineers in a wide range. Herein the desire of vehicle manufacturers to remotely execute software updat....
CAN Crypto FPGA Chip to Secure Data Transmitted Through CAN FD Bus Using AES-128 and SHA-1 Algorithms with A Symmetric Key
Author(s): Doan, T. and Ganesan, S.
Abstract Robert Bosch GmBH proposed in 2012 a new version of communication protocol named as Controller area network with Flexible Data-Rate (CANFD), that supports data frames up to 64 bytes compared ....
Experimental Investigation of the Impact of Nanofluids on Heat Transfer Performance of a Motorcycle Radiator
Author(s): Mathivanan, E., Gasior, D., Liu, L., Yee, K. et al.
Abstract In the present work, the effect of various nanofluids on automotive engine cooling was experimentally studied. Al2O3, TiC, SiC, MWNT (multi-walled nanotube), and SiO2 nanoparticles with avera....
Reducing the Acoustic Surface Power of a Cooling Fan Using the Mesh Morpher Optimizer
Author(s): Kheirallah, M., Jawad, B., and Liu, L.
Abstract Cooling fans have many applications in industrial and electronic fields that remove heat away from the system. The process of designing a new cooling fan with optimal performance and reduced ....
Investigation of the Effect of Vortex Generation on Flow Structure and Heat Transfer Enhancement using Particle Image Velocimetry (PIV)
Author(s): Morjan, S., Jawad, B., and Liu, L.
Abstract In this experimental work, a flow field test system embedded with different vortex generators was installed to investigate the impact of vortex generation on heat transfer of air flow in a ho....
Real-Time Coupling Coefficient Estimation for Inductive Power Transfer Systems
Author(s): Dadras, S. and Malek, H.
Abstract Loosely coupled transformers are commonly used in inductive power transfer (IPT) systems which are inevitable part of electrified transportation. Since efficiency of these systems is mainly d....
Effects of Inlet Curved Spacer Arrancement on Centrifugal Pump Impellers
Author(s): Hermez, M., Jawad, B., Liu, L., and Oklejas, E.
Abstract This paper presents an experimental investigation of flow field instabilities in a centrifugal pump impeller at low flow rates. The measurements of pump hydraulic performance and flow field i....
Synchronous Motor with Silicon Steel Salient Poles Rotor and All Coils Placed on the Stator
Author(s): Gladyshev, S., Gladyshev, P., and Okrainskaya, I.
Abstract In this paper, we consider a new design of synchronous motor with salient poles rotor and all coils placed on the stator. This design, uses a laminated silicon steel rotor, which is not so ex....
Electric Drive Transient Behavior Modeling: Comparison of Steady State Map Based Offline Simulation and Hardware-in-the-Loop Testing
Author(s): Chambon, P., Deter, D., Smith, D., and Bauman, G.
Abstract Electric drives, whether in battery electric vehicles (BEVs) or various other applications, are an important part of modern transportation. Traditionally, physics-based models based on steady....
Enhanced Process to Improve Supplier’s Quality and Reduce Warranty
Author(s): Michael, C., Jawad, B., Liu, L., Fernandez, V. et al.
Abstract The objective of this research is to develop a component based enhanced production process after End of Line (EOL) testing. This process will add more quality validation evaluations, but will....
Integrated Systems Engineering Approach for Incremental 48Volt Hybrid Technology Introduction
Author(s): Naidu, A., Brittle, P., Ma, X., and Rutter, B.
Abstract Automotive product engineering is highly complex. Understanding the implications and opportunities of introducing new technology needs to be identified as early as possible in the vehicle des....
Industrial Base Sustainment through Risk Modeling with Model-Based Systems Engineering Applications
Author(s): Patria, G. and Mynderse, J.
Abstract There is evidence to suggest that before military equipment ever experiences sustainment delays the equipment carries state patterns within its logistics and supply chain data history that co....
New Approach of Tools Application for Systems Engineering in Automotive Software Development
Author(s): Santos, M., Mendes, C., Banik, T., Franco, F. et al.
Abstract This paper outlines the modeling process in SysML (Systems Modeling Language) in context of MBSE (Model Based Software Engineering) as well as the MBD (Model-Based Design) in Simulink and we ....
Optimizing the Rear Fascia Cutline Based On Investigating Deviation Sources of the Body Panel Fit and Finish
Author(s): Mansour, J., Jawad, B., Liu, L., Fernandez, V. et al.
Abstract A vehicle’s exterior fit and finish, in general, is the first system to attract customers. Automotive exterior engineers were motivated in the past few years to increase their focus on how to....
Systems Engineering Approach for Voice Recognition in the Car
Author(s): Wheeler, J., Richardson, B., Amman, S., Ji, A. et al.
Abstract In this paper, a systems engineering approach is explored to evaluate the effect of design parameters that contribute to the performance of the embedded Automatic Speech Recognition (ASR) eng....
Development Solar charging system of Vehicle
Author(s): Go, K., Hirano, T., Miyoshi, T., and Sato, D.
Abstract Fuel consumption and CO2 emission regulations for vehicles, such as the Zero Emission Vehicle (ZEV) Regulation, motivate renewable energy technologies in the automotive industry. Therefore, t....
Viewing 1 to 17 of 17